[1] Schneider C. R. A. , Use and Calibration of the Surface Roughness Measuring Machine, Nuclear Electric Plc Technology Division, June 1991, TIRBNA/W1/016/RR
[2] 5 Phase Stepping Motor Systems, Berger Lahr GmbH, Catalogue No. 250/3 April 82
[3] DMS541 IBM PC, XT and AT Measurement and Control Interface System Operating Manual, 1985 DI-AN, DMS905-B2
[4] Pascoe P. T. & Stansfield A. M. , MIPS Data Collection Software Manual, Issue 2 March 1994, Nuclear Electric Engineering Division Structural Engineering Services Section Automated NDT Group.
[5] The Spindrift Library Reference Manual for Microsoft Fortran, Spindrift Laboratories Ltd,Illinois USA. 1987
[6] Young, Graham N., Surface Finish: Interfacing a 'Talysurf 4' Surface Measuring Instrument with a Computer. Dept of Mechanical Production & Chemical Engineering, Manchester Polytechnic, 1984
[7] Surface Texture Parameters, Card leaflet, Rank Taylor Hobson Ltd document no 800-301/984 B0 21m, Leicester.
[8] Specimen Surface Measuring System 6A, Central Electricity Generating Board N.W. Region Scientific Services Dept, Manchester Drawing no RC/SS/A0/48804,1984
[9] Precision Motor Driven Linear Translation Units, Diagram of Pin Connections and Wiring to Stepper Motor,Ealing Beck Ltd. Watford, 1984
[10] P. J. Naybour, Design, Construction and Verification of Equipment, Work Instruction no TIGT/WI/058, Issue 3 (internal use only), Nuclear Electric Technology Division, 1993
[11] Notes on Linear Variable Differential Transformers, Technical Bulletin AA-1b, Schaevitz Engineering, Pennsauken, 1955
[12] Schaevitz H. , The Linear Variable Differential transformer, The Proceedings of the Society for Experimental Stress Analysis, Volume IV, Number 2, 1946
[13] Transducer Indicator Technical Manual, E307 - 3, Issue no 1, RPD Electronics Ltd, Wolverhampton.
[14] Webster P. W. , and Schneider C. R. A. , Surface Contour Plotting System Version 8, BBC Basic computer program, Nuclear Electric, Wythenshawe.
[15] Webster P. W. , BBC to Berger Motor Controller Interface, Nuclear Electric, Wythenshawe, 1985
[16] Talysurf 10 Versatility in Surface Texture Measurement, (Technical Brochure), Rank Taylor Hobson Ltd, Leicester.
[17] Protrace Electronic Profile tracing System, Technical Information for EPTS2, Stonebridge Instruments, Leeds.
[18] Gauging transducers, Technical Information brochure GT 10/84, Sanagmo, Bognor Regis.
[19] Webster P. and Coffey J. M. , Proposal for an Instrument to Measure the Form of Rough Crack-Like Surfaces, document no NWR / SSD / 84 / 0081 / R Nuclear Electric, Wythenshawe, 1984
[20] Umerji M. , Notes on the rectification of faults on the Surface roughness Measuring System (report), Nuclear Electric, Wythenshawe,1989.
[21] OD5 User Leaflet, Issue 4, Schlumberger, Bognor Regis, 1993.
[22] Franklin S. , Schneider C. , Webster P. , An Instrument for Measuring the Surface Height Contours of Rough Crack Faces, document no OED / STN / 87 / 20151 / R, Operational Engineering Division, Central Electricity Generating Board, Wythenshawe, 1987.
[23] Wust C. , Capson D.W. , Surface Profile Measurement using Color Fringe Projection, Machine Vision and Applications, Vol 4 Issue 3 pages 193-203, USA, 1991.
[24] Butler C. ,Gregoriou G. , Novel Non-contact Sensor for Surface topolography Measurements using Fibre Optics, Proceedings of SPIE - The International Society for Optical Engineering, Vol 1584, USA, 1991.